Apache HTTP Server Version 2.2
This document describes how to efficiently serve an arbitrary number of virtual hosts with Apache.
mod_rewrite
mod_rewrite
The techniques described here are of interest if your
httpd.conf
contains many
<VirtualHost>
sections that are
substantially the same, for example:
NameVirtualHost 111.22.33.44
<VirtualHost 111.22.33.44>
ServerName www.customer-1.com
DocumentRoot /www/hosts/www.customer-1.com/docs
ScriptAlias /cgi-bin/ /www/hosts/www.customer-1.com/cgi-bin
</VirtualHost>
<VirtualHost 111.22.33.44>
ServerName www.customer-2.com
DocumentRoot /www/hosts/www.customer-2.com/docs
ScriptAlias /cgi-bin/ /www/hosts/www.customer-2.com/cgi-bin
</VirtualHost>
# blah blah blah
<VirtualHost 111.22.33.44>
ServerName www.customer-N.com
DocumentRoot /www/hosts/www.customer-N.com/docs
ScriptAlias /cgi-bin/ /www/hosts/www.customer-N.com/cgi-bin
</VirtualHost>
The basic idea is to replace all of the static
<VirtualHost>
configuration with a mechanism
that works it out dynamically. This has a number of
advantages:
The main disadvantage is that you cannot have a different log file for each virtual host; however if you have very many virtual hosts then doing this is dubious anyway because it eats file descriptors. It is better to log to a pipe or a fifo and arrange for the process at the other end to distribute the logs to the customers (it can also accumulate statistics, etc.).
A virtual host is defined by two pieces of information: its
IP address, and the contents of the Host:
header
in the HTTP request. The dynamic mass virtual hosting technique
is based on automatically inserting this information into the
pathname of the file that is used to satisfy the request. This
is done most easily using mod_vhost_alias
,
but if you are using a version of Apache up to 1.3.6 then you
must use mod_rewrite
.
Both of these modules are disabled by default; you must enable
one of them when configuring and building Apache if you want to
use this technique.
A couple of things need to be `faked' to make the dynamic
virtual host look like a normal one. The most important is the
server name which is used by Apache to generate
self-referential URLs, etc. It is configured with the
ServerName
directive, and it is available to CGIs
via the SERVER_NAME
environment variable. The
actual value used at run time is controlled by the UseCanonicalName
setting. With UseCanonicalName Off
the server name
comes from the contents of the Host:
header in the
request. With UseCanonicalName DNS
it comes from a
reverse DNS lookup of the virtual host's IP address. The former
setting is used for name-based dynamic virtual hosting, and the
latter is used for IP-based hosting. If Apache cannot work out
the server name because there is no Host:
header
or the DNS lookup fails then the value configured with
ServerName
is used instead.
The other thing to `fake' is the document root (configured
with DocumentRoot
and available to CGIs via the
DOCUMENT_ROOT
environment variable). In a normal
configuration this setting is used by the core module when
mapping URIs to filenames, but when the server is configured to
do dynamic virtual hosting that job is taken over by another
module (either mod_vhost_alias
or
mod_rewrite
) which has a different way of doing
the mapping. Neither of these modules is responsible for
setting the DOCUMENT_ROOT
environment variable so
if any CGIs or SSI documents make use of it they will get a
misleading value.
This extract from httpd.conf
implements the
virtual host arrangement outlined in the Motivation section above, but in a
generic fashion using mod_vhost_alias
.
# get the server name from the Host: header
UseCanonicalName Off
# this log format can be split per-virtual-host based on the first field
LogFormat "%V %h %l %u %t \"%r\" %s %b" vcommon
CustomLog logs/access_log vcommon
# include the server name in the filenames used to satisfy requests
VirtualDocumentRoot /www/hosts/%0/docs
VirtualScriptAlias /www/hosts/%0/cgi-bin
This configuration can be changed into an IP-based virtual
hosting solution by just turning UseCanonicalName
Off
into UseCanonicalName DNS
. The server
name that is inserted into the filename is then derived from
the IP address of the virtual host.
This is an adjustment of the above system tailored for an
ISP's homepages server. Using a slightly more complicated
configuration we can select substrings of the server name to
use in the filename so that e.g. the documents for
www.user.isp.com
are found in
/home/user/
. It uses a single cgi-bin
directory instead of one per virtual host.
# all the preliminary stuff is the same as above, then
# include part of the server name in the filenames
VirtualDocumentRoot /www/hosts/%2/docs
# single cgi-bin directory
ScriptAlias /cgi-bin/ /www/std-cgi/
There are examples of more complicated
VirtualDocumentRoot
settings in the
mod_vhost_alias
documentation.
With more complicated setups you can use Apache's normal
<VirtualHost>
directives to control the
scope of the various virtual hosting configurations. For
example, you could have one IP address for homepages customers
and another for commercial customers with the following setup.
This can of course be combined with conventional
<VirtualHost>
configuration sections.
UseCanonicalName Off
LogFormat "%V %h %l %u %t \"%r\" %s %b" vcommon
<Directory /www/commercial>
Options FollowSymLinks
AllowOverride All
</Directory>
<Directory /www/homepages>
Options FollowSymLinks
AllowOverride None
</Directory>
<VirtualHost 111.22.33.44>
ServerName www.commercial.isp.com
CustomLog logs/access_log.commercial vcommon
VirtualDocumentRoot /www/commercial/%0/docs
VirtualScriptAlias /www/commercial/%0/cgi-bin
</VirtualHost>
<VirtualHost 111.22.33.45>
ServerName www.homepages.isp.com
CustomLog logs/access_log.homepages vcommon
VirtualDocumentRoot /www/homepages/%0/docs
ScriptAlias /cgi-bin/ /www/std-cgi/
</VirtualHost>
After the first example I noted that it is easy to turn it into an IP-based virtual hosting setup. Unfortunately that configuration is not very efficient because it requires a DNS lookup for every request. This can be avoided by laying out the filesystem according to the IP addresses themselves rather than the corresponding names and changing the logging similarly. Apache will then usually not need to work out the server name and so incur a DNS lookup.
# get the server name from the reverse DNS of the IP address
UseCanonicalName DNS
# include the IP address in the logs so they may be split
LogFormat "%A %h %l %u %t \"%r\" %s %b" vcommon
CustomLog logs/access_log vcommon
# include the IP address in the filenames
VirtualDocumentRootIP /www/hosts/%0/docs
VirtualScriptAliasIP /www/hosts/%0/cgi-bin
The examples above rely on mod_vhost_alias
which appeared after version 1.3.6. If you are using a version
of Apache without mod_vhost_alias
then you can
implement this technique with mod_rewrite
as
illustrated below, but only for Host:-header-based virtual
hosts.
In addition there are some things to beware of with logging.
Apache 1.3.6 is the first version to include the
%V
log format directive; in versions 1.3.0 - 1.3.3
the %v
option did what %V
does;
version 1.3.4 has no equivalent. In all these versions of
Apache the UseCanonicalName
directive can appear
in .htaccess
files which means that customers can
cause the wrong thing to be logged. Therefore the best thing to
do is use the %{Host}i
directive which logs the
Host:
header directly; note that this may include
:port
on the end which is not the case for
%V
.
mod_rewrite
This extract from httpd.conf
does the same
thing as the first example. The first
half is very similar to the corresponding part above but with
some changes for backward compatibility and to make the
mod_rewrite
part work properly; the second half
configures mod_rewrite
to do the actual work.
There are a couple of especially tricky bits: By default,
mod_rewrite
runs before the other URI translation
modules (mod_alias
etc.) so if they are used then
mod_rewrite
must be configured to accommodate
them. Also, some magic must be performed to do a
per-dynamic-virtual-host equivalent of
ScriptAlias
.
# get the server name from the Host: header
UseCanonicalName Off
# splittable logs
LogFormat "%{Host}i %h %l %u %t \"%r\" %s %b" vcommon
CustomLog logs/access_log vcommon
<Directory /www/hosts>
# ExecCGI is needed here because we can't force
# CGI execution in the way that ScriptAlias does
Options FollowSymLinks ExecCGI
</Directory>
# now for the hard bit
RewriteEngine On
# a ServerName derived from a Host: header may be any case at all
RewriteMap lowercase int:tolower
## deal with normal documents first:
# allow Alias /icons/ to work - repeat for other aliases
RewriteCond %{REQUEST_URI} !^/icons/
# allow CGIs to work
RewriteCond %{REQUEST_URI} !^/cgi-bin/
# do the magic
RewriteRule ^/(.*)$ /www/hosts/${lowercase:%{SERVER_NAME}}/docs/$1
## and now deal with CGIs - we have to force a MIME type
RewriteCond %{REQUEST_URI} ^/cgi-bin/
RewriteRule ^/(.*)$ /www/hosts/${lowercase:%{SERVER_NAME}}/cgi-bin/$1 [T=application/x-httpd-cgi]
# that's it!
mod_rewrite
This does the same thing as the second example.
RewriteEngine on
RewriteMap lowercase int:tolower
# allow CGIs to work
RewriteCond %{REQUEST_URI} !^/cgi-bin/
# check the hostname is right so that the RewriteRule works
RewriteCond ${lowercase:%{SERVER_NAME}} ^www\.[a-z-]+\.isp\.com$
# concatenate the virtual host name onto the start of the URI
# the [C] means do the next rewrite on the result of this one
RewriteRule ^(.+) ${lowercase:%{SERVER_NAME}}$1 [C]
# now create the real file name
RewriteRule ^www\.([a-z-]+)\.isp\.com/(.*) /home/$1/$2
# define the global CGI directory
ScriptAlias /cgi-bin/ /www/std-cgi/
This arrangement uses more advanced mod_rewrite
features to get the translation from virtual host to document
root from a separate configuration file. This provides more
flexibility but requires more complicated configuration.
The vhost.map
file contains something like
this:
www.customer-1.com /www/customers/1
www.customer-2.com /www/customers/2
# ...
www.customer-N.com /www/customers/N
The http.conf
contains this:
RewriteEngine on
RewriteMap lowercase int:tolower
# define the map file
RewriteMap vhost txt:/www/conf/vhost.map
# deal with aliases as above
RewriteCond %{REQUEST_URI} !^/icons/
RewriteCond %{REQUEST_URI} !^/cgi-bin/
RewriteCond ${lowercase:%{SERVER_NAME}} ^(.+)$
# this does the file-based remap
RewriteCond ${vhost:%1} ^(/.*)$
RewriteRule ^/(.*)$ %1/docs/$1
RewriteCond %{REQUEST_URI} ^/cgi-bin/
RewriteCond ${lowercase:%{SERVER_NAME}} ^(.+)$
RewriteCond ${vhost:%1} ^(/.*)$
RewriteRule ^/(.*)$ %1/cgi-bin/$1